CC-B Style Fabricated
Agricultural Service Elevator Buckets
CC-B Style elevator buckets are designed to be used in high speed centrifugal discharge bucket elevators running belt. The CC style bucket is the most widely accepted grain style elevator bucket in North America due to its discharge characteristics. Designed with four breaks in the bottom, straight sides and ears; this allows discharge of the widest range of products at the widest range of elevator speeds. Typically, CC buckets elevate fluffy or free flowing materials where high speed discharge is required.
Typical Products Elevated:
Barley, Beans, Corn, Feeds, Fertilizer, Flour, Grains, Milling, Nuts, Pellets, Rice, Salt, Seeds, Sugar as well as many others……
Bucket Specifications
| Design: | High Speed Centrifugal Discharge |
| Materials: | Carbon Steel or Stainless Steel |
| Options: | Special Punching, Venting, Wear Lips & Lip Braces |
| Vertical Spacing: | Bucket “nominal projection” 1” for belt elevators |
| Construction: | Manufactured in a 1-Piece design which consists of the body and two end plates, spot welded on the outside. |
| Installation: | Belt – Use Fanged or #1 Norway elevator bolts with hardware |
Why Use “Water Level 10%” Capacity for Engineering Purposes?
T.O.P.S. Inc. recommends using “Water Level 10%” capacity on all agricultural style elevator buckets for “real world” engineering. Agricultural products have various angles of repose due to their free flowing nature, causing product to form a mound in the elevator bucket when loaded; also known as Water Level 10%. This calculation allows for a more accurate, yet still conservative elevator bucket rating and has been in use for many years among engineers and bucket elevator manufacturers worldwide. Please don’t hesitate to contact T.O.P.S. Inc. for engineering recommendations.
Don’t see what you need!!
Should you not see the exact size CC bucket you are looking for from our chart of standard sizes and materials, please don’t hesitate to contact our sales staff.